Smurfit Westrock engineers 100 percent paper-based packaging for Andersen EV chargers

Smurfit Westrock engineers 100 percent paper-based packaging for Andersen EV chargers

Smurfit Westrock's Peterborough facility has engineered a fully corrugated, plastic-free packaging solution for Andersen EV's premium chargers, cutting EPR costs by 50%.

July 22, 2026
5 min read

In a significant development for the automotive and electrical components packaging sector this July 2026, Smurfit Westrock’s Peterborough facility has successfully engineered a fully paper-based packaging solution for Andersen EV. The project, designed specifically for the manufacturer's premium A3 and A4 home electric vehicle chargers, highlights the ongoing industrial shift from traditional EPS (expanded polystyrene) and mixed plastics toward high-performance corrugated board for heavy-duty consumer electronics.

Virtual Prototyping Under Tight Deadlines

The transition from brief to market execution was remarkably demanding. Andersen EV approached Smurfit Westrock with a strict eight-week window to design, test, and manufacture the new packaging line. Adding complexity to the timeline, physical product samples of the new chargers were completely unavailable during the initial design phase.

To bypass this logistical hurdle, the engineering team at Peterborough relied entirely on CAD software to develop and refine the packaging structures using only technical specifications. This virtual testing approach ensured that the packaging would meet performance, usability, and stringent sustainability requirements without the delays inherent in traditional physical prototyping. Furthermore, Smurfit Westrock leveraged its proprietary paper-to-box software application to calculate the absolute minimum board caliper required. This analytical optimization maintained the necessary structural rigidity to protect high-value, heavy electronics while aggressively stripping out unnecessary material weight and bulk.

Structural Engineering and B-Flute Precision

The resulting structural design showcases several notable innovations in corrugated engineering that prepare the packs for upcoming ISTA (International Safe Transit Association) testing requirements. The outer case is manufactured from a robust B-flute material, selected specifically to provide a smooth, high-quality printing surface that aligns with Andersen’s premium brand aesthetic while offering excellent foldability during assembly.

A key structural feature of the design is the reimagined lid construction. Rather than folding the internal flaps downward—a standard industry practice that often leads to bending or weakening over time—the flaps are engineered to fold a full 180 degrees inward. This reinforces the lid, dramatically improving both the stacking strength and the clean aesthetic of the closed pack. Additionally, a safe-edge rule was incorporated at the front of the pack, where the consumer interacts most with the box, to minimize the risk of paper cuts.

Inside the package, dynamic product protection is handled by custom-designed double-wall BC-flute inserts. These heavy-duty corrugated fittings provide the necessary puncture resistance and cushioning for the EV hardware, cradling the unit from below and buffering the sides. The layout is highly organized, securely housing the charger alongside a central welcome pack with integrated finger holes for intuitive unpacking.

Slashing EPR Liabilities by 50 Percent

From a market perspective, the switch to a completely paper-based, plastic-free solution is not merely an environmental move; it is a highly strategic financial decision. By eliminating foam and plastics, Andersen EV achieved an estimated 50% cost saving on their Extended Producer Responsibility (EPR) liabilities. In 2026, as EPR regulations tighten globally and penalize hard-to-recycle materials, corrugated packaging is proving to be a critical tool for brands looking to control compliance costs while guaranteeing end-of-life recyclability.

By utilizing the exact same internal fitting design across both the A3 and A4 models, Smurfit Westrock also streamlined the manufacturer's SKU inventory, creating a unified unboxing experience and driving operational efficiency directly on the packing line.

The ability of Smurfit Westrock to deliver a fully customized, structural corrugated solution without physical product samples speaks volumes about the maturity of virtual design tools in our industry today. This project perfectly illustrates that premium product protection and aggressive regulatory cost-efficiency do not have to be mutually exclusive. As EPR compliance costs continue to squeeze margins, how quickly will other heavy-duty electronics manufacturers realize they cannot afford to delay the transition from EPS to precision-engineered corrugated alternatives? Follow The Paper for daily news, market signals and key updates from the global paper, corrugated and packaging industry. — Sigue toda la actualidad del sector en www.thepaper.ai

Enjoying this article?

Register free to save and share.

Tags

#Smurfit Westrock
#Andersen EV
#corrugated packaging
#EPR compliance
#B-flute
#CAD design
#cartón corrugado
#embalaje sostenible
#automotive packaging
#plastic replacement