
Emtec deploys ultrasonic surface measurement in London to predict converting failures
Emtec Electronic presented its EST 12 ultrasonic tester at the Paper & Tissue Show London to help manufacturers predict the printability and gluability of paper and board.
Anticipating substrate behavior before the press
The gap between laboratory testing and the dynamic reality of high-speed converting lines has long been a blind spot for paper and board manufacturers. To address this operational disconnect, Leipzig-based emtec Electronic presented its specialized measurement portfolio at the Paper & Tissue Show London, which concluded on November 12, 2026, at Excel London. While the company showcased several established instruments, the focal point for the packaging and converting sector was the EST 12 Surface & Sizing Tester, a device engineered to predict how a substrate will behave during printing, gluing, and coating.
Conventional testing methods often fail to adequately reflect the rapid physical interactions that occur when paper or board meets ink, adhesive, or coating colors on industrial machinery. The EST 12 bypasses these limitations by utilizing ultrasonic measurement technology to analyze the penetration behavior of test liquids in real-time. The instrument isolates two critical parameters: surface sizing, which dictates surface hydrophobicity, and surface porosity. By capturing these metrics within a process-relevant timeframe, the system provides a highly accurate prediction of printability, gluability, and coatability.
Reducing waste in the converting workflow
For converters, the ability to anticipate material performance is a direct lever for profitability. Identifying a substrate's poor adhesive absorption or irregular ink holdout before the reel is mounted on a flexo press or fed into a folder-gluer prevents costly machine downtime and reduces material waste. Sales Area Managers Philipp Sievers and Andrea Maldonado Castellar, supported by UK partner Solstar, detailed how these predictive insights allow operators to adjust machine settings or reject out-of-spec batches proactively, rather than discovering the defect in the finished carton.
Beyond the EST 12, the emtec team also exhibited the FPA Fiber Potential Analyzer and the CAS Charge Analyzing System, which target wet-end optimization by measuring particle charge and zeta potential. The TSA Tactile Sensation Analyzer rounded out the presentation, focusing on the objective measurement of tissue softness. However, for the corrugated and folding carton industries, the deployment of ultrasonic surface analysis represents the most immediate tool for bridging the gap between paper mill quality control and the rigorous demands of modern converting operations.
Enjoying this article?
Register free to save and share.
