Pentatech SRL

Pentatech SRL

Pentatech SRL is an Italian designer and manufacturer of automation and material-handling systems for the corrugated packaging industry, founded in 2007 in Lavezzola, Conselice, Ravenna. Its portfolio covers automatic and robotic prefeeders, palletising and load-forming lines, stripper stackers, pallet and sheet feeders, conveyors and automatic WIP storage. It develops layouts, electrical panels, control software and after-sales support in-house. The company reports more than 1,000 motorised handling systems installed worldwide.

Products

Pentatech SRL
WIP ASRS

Automatic Warehouse — Two-level WIP Storage

Material handling

Modular automatic storage system for corrugated sheets. Products are identified on arrival; software calculates storage space, tracks each product and recalls it according to the production plan. The system uses two levels of ACETAL-belt conveyors and an automatic shuttle with an integrated lift.

Two-level modular storage

Automatic shuttle with integrated lift

Pentatech SRL
Pre-feeders

Crab — Robotic Prefeeder

Feeding lines

Automatic prefeeder for top- or bottom-printing machines. It combines a motorised ACETAL conveyor, stack guide and waste-sheet ejection, a six-axis robotic arm with a sheet-bundle gripper, and a retractable feed table with a bundle-levelling pre-chamber. Feeding is continuous, sheet by sheet.

Six-axis robotic arm

Retractable feeding table

Pentatech SRL
Pre-feeders

CTB / CTA — Large-format Prefeeders

Feeding lines

Prefeeders for feeding bundles of corrugated sheets to large-format flexo folder gluers and rotary die-cutters. A crosswise bundle-turning device allows coupling to top-printing machines. Bundle centring and integrated shingling devices are available on request.

Sheet width: 2,000–4,500 mm

Stack height up to 2,500 mm

Pentatech SRL
Pre-feeders

CVB / CVA — Automatic Prefeeders

Feeding lines

Automatic block feeding for flexo folder gluers, rotary and flatbed die-cutters and flexographic printers in the HBL version. The line supplies a homogeneous, continuous shingled flow. Versions are available for top- and bottom-printing machines.

Width: 1,800–4,500 mm

Stack height up to 2,500 mm

Pentatech SRL
Pre-feeders

CVE — Automatic Prefeeder

Feeding lines

Automatic block feeder for flexo folder gluers, rotary or flatbed die-cutters and flexographic printers in the HBL version. The bundle-tipping module can be enabled or disabled on the touch panel to configure the feeding arrangement for top- or bottom-printing machines.

Switchable bundle-tipping module

Top/bottom-printing applications

Pentatech SRL
Conveyors

Material Handling — Conveyors and Shuttles

Material handling

Custom-configured handling systems for work in progress and finished products. The range includes driven and undriven roller conveyors, roller shuttle cars, pile turntables, 90-degree roller/chain transfers, ACETAL plastic-belt conveyors and automatic shuttles. Dimensions and layout are determined for the project.

Roller and ACETAL-belt systems

Project-specific layout

Pentatech SRL
Load Formers

MFA — Automatic Sheet-inserter Gripper

Material handling

Automatic sheet feeder with gripper for integration on a strapping line. The MFA is part of Pentatech’s material-handling range and supports automatic sheet insertion in the finishing process. The official manufacturer page and current corporate brochure are provided for technical consultation.

Automatic sheet feeder

Gripper-based insertion

Pentatech SRL
Load Formers

MP — Automatic Pallet Feeder

Material handling

Automatic pallet insertion under stacks of boxes or sheets on strapping lines. The equipment combines a double stack lifter and opposing joggers, synchronized with the pallet-picking and placing gripper. The standard maximum stack footprint is 2000×2000 mm, with larger sizes on request.

Standard stack: 2000×2000 mm

Up to 10 pallet stations

Pentatech SRL
Palletizers

PLP — Die-cut Box Palletizer

Palletising lines

Automatic palletizer for one or two stacks of die-cut box bundles. It combines an ACETAL rotating and aligning table, layer-forming unit with levelling, automatic interlayer-sheet feeding, pallet or under-stack sheet feeding, and stack levelling on all four sides. Format changes are managed from a 12-inch touch screen.

One or two stacks

Four-sided stack levelling

Pentatech SRL
Load Formers

PLT — Flexo Folder Gluer Load Former

Palletising lines

Load former for stacking bundles of folding boxes in single or multiple layers. The touch-screen interface supports saving and recalling job settings. Standard and Maxi variants have different maximum stack sizes; the documented layer-forming library contains 97 preset configurations and can be extended.

Standard stack: 1650×1650×2000H mm

97 preset layer configurations

Pentatech SRL
Load Formers

PLT-F — Die-cut Box Load Former

Palletising lines

Palletizing line for separating, forming layers and stacking bundles of boxes from rotary or flatbed die-cutters. It can integrate a BRK breaker, GMA rotating table and VST layer turner. The published configuration includes a process database, 12-inch touch screen, inverter drives and an extendable library of 50 layer formations.

2100×1700×2000H mm

50 preset layer configurations

Pentatech SRL
Palletizing Robots

PLT-R — Anthropomorphic Palletizer

Palletising lines

Palletizing line with an anthropomorphic robot and multifunction gripper for bundles, sheets and pallets. Its arrangement includes a base/interlayer-sheet magazine and pallet storage. The operator can save and recall settings through the touch-screen interface.

Published format: 1000×1200 mm

Maximum height: 2800 mm