Fosber

Fosber

Cutting-edge technology for the corrugated board industry identifies Fosber Group. Headquartered in Italy with global operations, it designs complete lines, automation and digital solutions to optimize production efficiency.

Products

Fosber
Complete Corrugator Lines

400 Line Complete Corrugator

Complete corrugator line

The Fosber 400 Line is the complete corrugator line of the 400 series for North America. The wet end combines the Smart 400 single facer (quick flute change cassette machine), Stand M2 and Link M3 roll stands and splicers, the Crest 400 glue machine and the ThermoStack 400 preheater. The dry end is built around the Express 400 double facer with cast iron hot plates, the Rotary Shear 400, the Twin 400 slitter scorer, the Master 400-H NC cut-off knife and the Terminal 400 stacker, running at up to 1500 ft/min in 98 or 110 inch widths with no-gap order change. The whole line is controlled by the Syncro system with Allen-Bradley electronics and intelligent guard monitoring, and is backed locally by Fosber America in Green Bay, Wisconsin.

Up to 1500 ft/min, 98 or 110 inch widths

400 Series wet and dry end engineered together

Fosber
Corrugating Rolls and Recoating

Corrugating Rolls (Tiruña)

Corrugator component and roll service

Fosber Group, through its Tiruña roll division, designs and manufactures corrugating rolls and pressure rolls for the corrugated board industry. Tiruña is knowledgeable of all the corrugating machines on the market and is able to manufacture any corrugating roll and pressure roll: depending on the machine type, fluting, corrugating roll coating and papers used, it designs and manufactures the corresponding rolls. The offer covers new rolls as well as recoating of existing rolls. In North America, Tiruna America operates roll manufacturing and service from Green Bay, Wisconsin, where it has installed a state-of-the-art Magerle creep feed roll grinder as phase one of a 6 million dollar investment and expansion, adding precision roll grinding capacity for the region.

Rolls for any corrugating machine on the market

Designed per machine, fluting, coating and papers

Fosber
Glue Machine

Crest Glue Machine

Corrugator wet-end machine

The Fosber Crest Glue Machine is the glue machine of the corrugator wet end in Fosber complete lines, applying starch adhesive to the flute tips before the double facer. The Crest 400 version (North America) is engineered for high-speed operation up to 1500 ft/min with the same configuration flexibility as the rest of the 400 series, and its glue application settings are managed together with the rest of the process by Fosber's Syncro control system, keeping bonding consistent across board grades. It is the reference glue machine of the S/Line and 400 line configurations (paired with the MPH ThermoStack preheater on the Fosber Asia module list).

Speeds up to 1500 ft/min (Crest 400)

Integrated with Syncro control

Fosber
Double Facer

Express Double Facer

Corrugator dry-end machine

The Fosber Express Double Facer bonds the single face web with the double backer liner under heat and pressure at the corrugator dry end. It uses cast iron hot plates for stable, uniform heating, with variable steam pressures from 7 to 220 psi and 9 to 20 hot plate configurations. The machine runs under Fosber's advanced Syncro automatic control with recipe-based operation and automatic width adjustment; steam and shoe pressure are configured in 3 or 4 zones with full width shoes on a hydraulic cammed shoe system. The easy thread-up design speeds grade changes, and Allen-Bradley electronics with intelligent guard monitoring come as standard. The Express 400 version (North America) reaches 1500 ft/min in 98 or 110 inch widths. A cost-effective machine that offers the most flexibility for future changes to the corrugator.

Cast iron hot plates, 7-220 psi variable steam pressure

9 to 20 hot plate configurations

Fosber
Slitter-scorer

Instant Set

Dry-end order change module

The Instant Set is a dry end module designed by Fosber Asia specifically to adapt to market challenges of small order production: its speed is faster than ever, obviously increasing order change speed and boosting production efficiency. It is a double module with optional auxiliary shaft for scorers, offering a maximum gapless automatic order change (AOC) speed of 250 m/min, positioning accuracy of +/-0.5 mm and an order change set-up time of 3 seconds.

Order change set-up in 3 s

Gapless AOC up to 250 m/min

Fosber
Automatic Splicers

Link Automatic Splicer

Corrugator wet-end machine

The Fosber Link is an automatic splicer for the corrugator wet end, designed to integrate precision and reliability through a simple design. Its patented sequence completes a true zero tail splice at maximum line speeds within 0.25 s, in a single action with no impact or hammer mechanisms. Two fixed splice preparation units at each end of the machine position the prepared paper automatically, eliminating operator indexing errors; no vacuum preparation bars are needed. An AC driven accelerator roll works with a servo controlled double-roll dancer to maintain constant web tension throughout the splice. Standard touch-screen provides on-screen diagnostics and maintenance procedure controls. It is normally associated with the Fosber Stand M2 roll stand. The Link 400 version (North America) splices at speeds up to 1310 ft/min.

Splice completed within 0.25 s

Zero tail splice at maximum line speeds

Fosber
Automatic Splicers

Link M3 Integrated Roll Stand & Splicer

Corrugator wet-end machine

The Fosber Link M3 is a combined roll stand and splicer group: a unique integrated solution that provides the shortest continuous automatic roll change cycle time available in the industry (70% less than conventional systems). Because all reel handling is contained to just one side of the corrugator, its cycle time is unaffected even when the machine is located close to a wall. The reel stand section offers automatic centering and alignment of rolls before loading, independent chuck arms with automatic web alignment, an automatic core ejector and latest multi-disc brakes for even tension. After splice-out, rolls are automatically rewound and ejected, so the operator can leave the area and perform other duties, reducing wet-end manpower requirements. The patented splice head completes the splice via a single continuous rotating nip movement with no impact or hammer mechanisms, delivering a true zero tail splice at maximum line speeds. The Link M3 400 version (North America) supports speeds up to 1500 ft/min.

Roll change cycle 70% shorter than conventional systems

One-side reel handling: works next to a wall

Fosber
NC Cut-off

Master Cut-Off Knife

Corrugator dry-end machine

The Fosber Master Cut-Off Knife cuts the corrugated web into sheets at the dry end under numerical control, delivering accurate sheet lengths at full line speed. The Master 400-H version (North America) operates at speeds up to 1500 ft/min and completes the 400 series dry end, which supports no-gap order change for continuous production between orders.

Speeds up to 1500 ft/min

Accurate sheet length control

Fosber
Automatic Splicers

PaperLink Compact Integrated Stand & Splicer

Corrugator wet-end machine

The Fosber PaperLink is a compact integrated splicer and roll stand machine unit for the corrugator wet end. It comes in versions for 250 m/min splice speed (4 m long) or 300 m/min with an extended festoon (5 m long). The integrated design reduces the machine-direction footprint and allows compatibility with much lower bridge heights, while also reducing installation time and freight costs. A fixed upper splice head positioned in the centre of the machine provides a single splice sequence movement and easy splice preparation. The PaperLink is used as the standard rollstand/splicer of the Fosber Quantum corrugator. Note: the Fosber Asia individual module page lists a Paperlink variant with splice speeds up to 150 m/min.

Compact footprint, compatible with low bridge heights

250 or 300 m/min splice speed versions

Fosber
CMMS / Maintenance Software

Pro/Care

Maintenance management software

Pro/Care is Fosber's intelligent maintenance management system for the corrugator. Its core concept is to remove the total reliance on people for this vital aspect of corrugator maintenance by having the machine itself dictate exactly which services need to be carried out. By continuously capturing actual production, process and machinery data in real time, Pro/Care intelligently and scientifically manages maintenance and technical support, providing pre-emptive diagnostics and unprecedented data analysis: it identifies, plans and instructs which pending maintenance tasks need to be carried out and when, detailing the resources, man hours, equipment and parts required, and illustrating the relevant step-by-step procedures through easy-to-follow video and photographic instructions. It generates maintenance reports and proposals for future activities. Two additional modules extend it: CMD (Corrugator Machine Diagnostics) constantly monitors all main motors and kinematic chains with a self-learning correlation matrix, instantly identifying anomalies and automatically notifying Fosber's customer care department so potential issues are addressed before they become problems; and CCM (Corrugator Consumption Monitoring) measures actual steam, electrical power, compressed air and starch consumption cross-referenced in real time with board production, enabling complete cost optimisation, energy usage and sustainability analysis. Pro/Care assists in maximising corrugator uptime and overall efficiency.

Machine-dictated, data-driven maintenance planning

CMD pre-emptive motor diagnostics with automatic Fosber care notification

Fosber
Complete Corrugator Lines

Pro/Line 320 Complete Corrugator

Complete corrugator line

The Pro/Line 320 is the complete corrugator line designed and built by Fosber Asia, listed on the official Fosber Group product portfolio alongside the S/Line family. It combines the Fosber module portfolio - Smart single facers, Link and Link M3 roll stands and splicers, MPH+ThermoStack and Crest gluing, Express double facer, Shear, Twin, Master and Terminal dry end - with the Syncro4 supervisor distributed by Fosber Asia and the Instant Set fast order change module. It is manufactured in Fosber Asia's new intelligent manufacturing facility, fully operational since May 2026, with regional service across Asia.

Complete line by Fosber Asia

New intelligent manufacturing facility (operational May 2026)

Fosber
Camera Inspection

Pro/Quality

Inline quality inspection system

Pro/Quality is Fosber's defect detection and monitoring system, installed at each single facer to monitor the web immediately at source as it exits the machine, just prior to the take-up conveyor. Utilising vision techniques and technologies, it monitors, detects and records in real time any defects across the full web width with 100 per cent coverage: paper surface defects as well as 3D defects such as delamination, bubbles, blistering, folds, wrinkles, tears, splice joints, flute crush or edge defects. The system is intrinsically linked to Fosber's Syncro corrugator control and wet-end process control to exchange all relevant production and process information of the running order, providing an analytical database of all defects created. Thanks to its integration with Syncro, Pro/Quality automatically tracks and ejects any detected waste sheets at the waste diverter located immediately after the cut-off knife, so only sellable board is passed on to the stacker. It also provides instant operator diagnostics and immediately adjusts relevant machine parameters and process settings to correct the detected defect. Pro/Quality not only optimises board quality and reduces waste but also guarantees no defective board from the corrugator is delivered to the plant's customer.

100% web width coverage, real time, at each single facer

Automatic waste sheet ejection via Syncro integration