Baumer hhs GmbH

Baumer hhs GmbH

Baumer hhs GmbH is a German manufacturer of industrial adhesive application and quality assurance systems, based in Krefeld and part of the Baumer Group. It supplies equipment for folding carton, corrugated board, end-of-line packaging, ecommerce packaging, print finishing and other industrial applications. Its portfolio is organised into Xcold for cold glue pumps and application heads, Xmelt for hot melt units, heated hoses and applicators, Xcontrol for application control and product tracking, Xcheck for adhesive inspection and quality monitoring, and Xcare for technical support and customer care. The company develops systems for installation in packaging and converting machinery; it should not be classified as a manufacturer of complete flexo folder gluers or as a supplier of adhesive chemicals. The Krefeld headquarters and manufacturing plant are at Adolf-Dembach-Straße 19, 47829 Krefeld. The official contact page also lists a Berlin location at Max-Dohrn-Straße 4, 10589 Berlin. The solution centre in Krefeld supports application development and adhesive selection. Baumer hhs GmbH is registered with the Krefeld commercial register under HRB 6948.

Products

Baumer hhs GmbH
Inline Glue Control

DPP-8 double-piston cold glue pump

Xcold

Electronically controlled double-piston pump for supplying cold glue at high production speeds. Coordinated pistons regulate adhesive pressure without a separate material pressure regulator. The unit communicates with the Xtend³ controller and reports errors on its display.

Regulated pressure up to 40 bar

Delivery rate up to 2 L/min

Baumer hhs GmbH
Inline Glue Control

GDX 1000 infrared cold glue sensor

Xcheck

Infrared sensor for monitoring cold glue application and glue-free areas. GDX 1000 supports setup and checks through the control unit. Published specifications include 20 kHz scanning and a minimum monitorable dot of 1 × 1 mm, with a measuring distance of 25 ± 5 mm.

20 kHz scanning frequency

Minimum monitored dot 1 × 1 mm

Baumer hhs GmbH
Inline Glue Control

HLT-300 hot melt detection sensor

Xcheck

Sensor for monitoring hot melt dots and lines. HLT-300 checks adhesive presence and whether the applied adhesive remains sufficiently hot for bonding. Evaluation takes place in the sensor; the manufacturer also offers a separate PLC-oriented version. Published scanning frequency is 10 kHz.

Dot and line detection

10 kHz scanning frequency

Baumer hhs GmbH
Inline Glue Control

PX 1000 cold glue application head

Xcold

Electric cold glue valve for precise, non-contact adhesive application. The PX 1000 combines a high closing force with dot application and clean cut-off. Its maximum published switching frequency of 750 Hz is specified at 20 bar adhesive pressure and 1,000 mPaS viscosity; actual performance depends on operating conditions.

Dot application

Up to 750 Hz under specified conditions

Baumer hhs GmbH
Inline Glue Control

PXH 1000 electric hot melt applicator

Xmelt

Electromagnetic hot melt applicator with a published application frequency of 450 Hz and support for adhesive viscosities up to 7,000 mPa.s. An integrated overtemperature switch supports operational safety. The manufacturer specifies more than one billion switching operations; service life remains dependent on operating conditions.

Application frequency 450 Hz

Viscosity up to 7,000 mPa.s

Baumer hhs GmbH
Inline Glue Control

Xact FFG go corrugated gluing controller

Xcontrol

Entry-level gluing control system for flaps in corrugated packaging production. Xact FFG go offers two or three glue tracks, dot/line switching and storage for 99 application patterns. The published maximum machine speed is 350 m/min. Its intermittent application mode can reduce adhesive use; actual savings depend on the starting pattern and production setup. It is a gluing control system, not a complete flexo folder gluer.

2 or 3 glue tracks

99 stored application patterns

Baumer hhs GmbH
Inline Glue Control

Xmelt fusion Basic 4 kg hot melt unit

Xmelt

Two-zone hot melt unit from the Xmelt fusion range, with a 4 kg tank and published melting capacity of 14 kg/h. The series includes an integrated-display configuration and a configuration with an external 7-inch display. An adhesive database and maintenance manager support operation. This record covers the 4 kg Basic unit, not the 8 kg Volume variant.

4 kg tank

Melting capacity 14 kg/h

Baumer hhs GmbH
Control Systems

Xpect glue high-speed adhesive controller

Xcontrol

Compact controller for adhesive application on high-speed machines in folding carton and tobacco production. Up to eight channels can be programmed individually. The manufacturer publishes machine speeds above 700 m/min, subject to the machine, applicators and application setup.

8 individually programmable channels

Published machine speed above 700 m/min

Baumer hhs GmbH
Control Systems

Xtend³ modular application and quality controller

Xcontrol

Modular control platform for adhesive application, product tracking and quality monitoring. Xtend³ can integrate sensors and camera inspection modules as production requirements expand. The published configuration supports up to 32 channels and a 21.5-inch multitouch operator interface, with a data interface for production records.

Up to 32 channels

Sensor and camera integration